Looking for a waterproofing agent in Lahore? StoneBird Chemicals manufactures waterproofing agents at our plant on Sheikhupura Road, Sagian Bypass, and sells direct to contractors, builders and homeowners across the city — no distributor markup in between.
A “waterproofing agent” is not one product. In the Pakistani market the phrase covers several different chemistries that do very different jobs, and the most common cause of failure is buying the right-sounding product for the wrong surface. This page tells you which one your job needs, how much you will need, and where to buy it in Lahore.
The five waterproofing agents we make and sell in Lahore
| Type | What it is | Best for | Typical use |
|---|---|---|---|
| Cementitious 2K (HydraShield / Aqua Shield 2K) | Two-component cement + polymer powder and liquid | Roofs, bathrooms, water tanks, basements | The default choice where a rigid, potable-water-safe membrane is needed |
| Elastomeric acrylic (Elasto Seal) | Ready-to-apply flexible coating | Roofs and terraces exposed to sun and rain | Topcoat over a 2K base, or standalone on sound roofs; UV resistant |
| Polyurethane (PU) (PU Roofkoat) | Solvent or water-based elastomer | Flat roofs and chajjas needing a seamless membrane | Premium option with the highest elongation and longest service life |
| SBR latex | Styrene butadiene rubber admixture | Screeds, plasters, repair mortar, bonding coats | Added to cement mixes to improve adhesion and reduce shrinkage cracking |
| Anti-leak / plugging agent | Rapid-setting hydraulic cement | Active leaks and running water at joints | Stops water in minutes so the main coating can then be applied |
Which agent for which problem
- Flat roof or chhat leaking in monsoon: plug any active crack, prime, apply cementitious 2K base, then elastomeric acrylic or PU topcoat.
- Bathroom seepage into the room below: 2K cementitious membrane on the floor and 300 mm up the walls, flood tested before tiles go back.
- Underground or overhead water tank: potable-water-safe 2K cementitious coating only. Never use a solvent-based product in a drinking-water tank.
- Damp rising up a wall, paint blistering at low level: SBR-modified render with a damp-proof course treatment — a surface coating alone will not stop rising damp.
- Leak that is actively running right now: plugging agent first to stop the flow, then the membrane system once the surface is stable.
Coverage: how much agent do you actually need?
Buying by guesswork is how jobs come up short mid-application. As a working guide — always confirm against the pack you receive:
- Cementitious 2K: roughly 1.5–2 kg per m² per coat, two coats. A 20 kg kit covers on the order of 10–14 m² of treated surface.
- Elastomeric acrylic: two coats, with the second applied at right angles to the first.
- PU: thinner films than cementitious systems, so a given quantity covers more area — but only on a correctly prepared, sound substrate.
- SBR latex: dosed as an admixture into the cement mix, not applied as a coating.
Send us your roof or bathroom dimensions on WhatsApp and we will calculate the packs for you before you buy. That is free and it is the single easiest way to avoid a mid-job shortage.
Buying factory-direction in Lahore
StoneBird manufactures in Sunder, Lahore. That gives you three practical advantages over buying an import through a dealer network:
- Consistent batch quality — the same plant, the same formulation, the same polymer dosing on every run.
- Factory pricing — you are not paying two layers of margin on a product that was shipped from overseas.
- Technical backup — coverage calculations, surface preparation advice and applicator guidance come from the people who make it.
Pickup and delivery: collect from the plant on Sheikhupura Road, Sagian Bypass, or we deliver across Lahore — DHA, Bahria Town, Askari, Johar Town, Wapda Town, Model Town, Gulberg, Faisal Town, Iqbal Town, Township, Shahdara and the Sunder industrial belt. Bulk orders ship nationwide to Karachi, Islamabad, Rawalpindi, Faisalabad, Multan, Gujranwala and Peshawar.
Where people go wrong with waterproofing agents
- Coating a wet or dusty slab. The film bonds to the dust, not the concrete, and lifts within a season.
- One thick coat instead of two correct coats. Thick films skin over, trap solvent and crack.
- No crack treatment. A coating bridges hairline cracks; a 2 mm movement crack will open again and split it.
- Wrong product for the surface. Flexible elastomers on a weak, friable render; rigid systems on a roof that moves.
- No flood test. The leak is found next monsoon instead of on the day of handover.
Frequently asked questions
What is the price of a waterproofing agent in Lahore?
It depends on the chemistry and pack size — a cementitious 2K kit, an acrylic drum and a PU system sit at very different price points, and rates move with polymer costs. Message us on WhatsApp for today’s factory rate; we quote packing, coverage and delivery together so you can compare like for like.
Can I apply it myself?
On a small, sound, accessible roof, yes — the main discipline is surface preparation, two coats at the stated coverage, and curing. On bathrooms, tanks, basements and anything with an active leak, an experienced applicator is worth the labour cost. See our applicator service in Lahore.
How long before the roof can be walked on?
Typically 24 to 48 hours for foot traffic and longer before furniture or heavy loads, depending on the system and the weather. Full curing is longer — we give exact timings at handover for the product you receive.
Do you supply outside Lahore?
Yes. We ship nationwide from the Lahore plant; the waterproofing agent hub page covers the full national range and typical applications.
Order waterproofing agent in Lahore
Call or WhatsApp +92 337 9647961 · email info@stonebirdchemicals.com
Product pages: HydraShield 2K · Elasto Seal White · Elasto Seal Grey · PU Roofkoat