StoneBird Chemicals manufactures waterproofing agents in Lahore and supplies them across Pakistan — to contractors, builders, distributors and homeowners. Every product is formulated for Pakistani conditions: monsoon rainfall, extreme summer heat on exposed slabs, and the temperature swings that crack ordinary coatings.
This page is the starting point for choosing a waterproofing agent. If you are buying in Lahore specifically, start with our waterproofing agent in Lahore page, which covers local stock, pickup and delivery. If you need the work done rather than the material, our waterproofing applicator service in Lahore handles inspection, application and warranty.
What a waterproofing agent is — and what it is not
A waterproofing agent is a material applied to, or mixed into, a building surface to stop water passing through it. The confusion in the Pakistani market comes from treating them as interchangeable. A cementitious membrane, an elastomeric roof coating, a polyurethane system, an SBR admixture and a plugging compound each solve a different problem. Buying the wrong one is the single most common reason waterproofing fails here within a single season.
The product families, and where each belongs
| Family | Action | Correct use | Do not use on |
|---|---|---|---|
| Cementitious 2K | Rigid, breathable membrane bonded to the substrate | Roofs, bathrooms, water tanks, basements, retaining walls | Surfaces that flex or crack — it has limited elongation |
| Elastomeric acrylic | Flexible film that bridges hairline cracks | Exposed roofs and terraces, topcoat over a base membrane | Constant standing water, below-grade work |
| Polyurethane (PU) | Seamless high-elongation membrane | Flat roofs, chajjas, complex detailing | Wet substrates, or budget-limited projects |
| SBR latex | Bonding agent and admixture | Screeds, plasters, repair mortars, bonding coats | Standalone roof membranes — it is an additive, not a coating |
| Plugging / anti-leak agent | Rapid-setting hydraulic compound | Stopping active running leaks at joints and cracks | Large-area waterproofing — it is a repair step, not a system |
Choosing by surface
- Concrete roof slab: prepare and prime, apply cementitious 2K base, then an acrylic or PU elastomeric topcoat for UV and monsoon resistance.
- Bathroom floor and wet walls: cementitious 2K membrane with a flood test before tiling. Movement joints need an elastomeric sealant.
- Water tank (potable): potable-water-certified cementitious coating only. Drain, clean, apply, cure, then flush before use.
- Basement / retaining wall: crystalline or cementitious treatment, with attention to construction joints and the drainage path outside.
- New construction: waterproof in sequence — foundation and basement first, then wet areas, then tank, then roof. Retrofitting later costs multiples of doing it once.
What “lab tested” means on our packs
Our products are tested to ASTM, EN and BS methods through a certified laboratory partner, PEC Consult/1433. That matters in a market where much of what is sold as polymer-modified is a repackaged cement-sand mix. Ask any supplier for the test method behind the claim, not just the badge on the bag.
Buying and delivery across Pakistan
Order direct from the plant in Sunder, Lahore. We deliver across Punjab, Sindh and Khyber Pakhtunkhwa, and supply dealers on tiered pricing. Distributors and contractors can read the commercial terms on the distribution page or simply call to discuss volume rates.
Frequently asked questions
Which waterproofing agent is best for a Pakistani roof?
For most Lahore and Punjab roofs: a cementitious 2K base for adhesion and crack treatment, finished with an elastomeric acrylic or polyurethane topcoat for UV and rain resistance. The best answer always depends on the slab condition — inspection first, product second.
Is waterproofing agent different from waterproofing paint?
Yes. Waterproofing paint is usually a decorative topcoat with some water resistance. A waterproofing agent forms a membrane designed to resist hydrostatic pressure. Paint over an active leak fails; a membrane system specified for the pressure it faces does not.
How much does waterproofing cost per square foot in Pakistan?
Material costs differ by chemistry and pack size, and labour varies by city and access. See our guide to waterproofing cost in Pakistan for the factors that drive the number, then request a quote for current rates.
Talk to us before you buy
Call or WhatsApp +92 337 9647961 · info@stonebirdchemicals.com
Lahore buyers: waterproofing agent in Lahore · Need application? applicator service in Lahore