- info@stonebirdchemicals.com
- 36/A Sundar Small Estate Lahore, Pakistan
- +923379647961
SB Pro Tile Bond Adhesive C2TE (20KG) is a high performance cementitious tile adhesive engineered for installing large format tiles, marble and ceramic tiles larger than 24 × 24 inches. Developed for demanding commercial and architectural applications, it offers superior bonding strength, extended open time, and excellent slip resistance. Its advanced formulation ensures secure tile placement on floors and walls while providing reliable performance for modern elevation designs and heavy duty commercial flooring projects.
Delivers improved bonding strength to keep tiles firmly fixed on floors and walls for long lasting performance.
Minimizes tile movement during installation, ensuring accurate alignment and a professional finish.
Provides more working time for easy adjustment and smoother installation without rushing.
Suitable for ceramic, porcelain, and mosaic tiles on interior and exterior surfaces.
StoneBird Chemicals Pro Tile Bond Adhesive C2TE is an improved performance cementitious tile adhesive developed to meet demanding construction requirements. Its advanced formulation provides strong bonding, excellent workability, and consistent results across a wide range of substrates and tile types.
Ceramic tiles
Porcelain tiles
Mosaic tiles
Floors and walls
Residential buildings
Commercial projects
Light industrial applications
Cement screeds
Concrete surfaces
Cement plaster
Brick masonry
Surfaces must be sound, clean, dry, and free from dust, oil, grease, or loose particles.
StoneBird Pro Tile Bond Adhesive C2TE has been tested in accordance with internationally recognized standards:
Compressive Strength:
Meets structural strength requirements for cementitious tile adhesives
(BS 1881 Part-4)
Pull Off Adhesion Strength:
Achieved improved adhesion consistent wit C2TE classification
(ASTM D-7234 / EN 12004)
Shear Strength:
Satisfactory resistance under load conditions
(AASHTO T 193)
Appearance: Grey powder
Bulk Density: ~1.4 – 1.6 g/cm³
Mixing Ratio: Approx. 5–6 liters clean water per 20 KG
Pot Life: 3–4 hours
Open Time: ≥ 30 minutes
Adjustability Time: 15–20 minutes
Approximately 4–5 m² per 20 KG bag
(Coverage depends on tile size, substrate condition, and trowel notch size.)
Add SB Pro Tile Bond Adhesive C2TE powder to clean water and mix until a smooth, lump free paste is achieved.
Allow the mixture to stand for 5 minutes, then remix before use.
Apply adhesive using a suitable notched trowel.
Fix tiles by pressing firmly into the adhesive bed.
Allow adequate curing before grouting.
Initial Set: 24 hours
Grouting Time: After 24 hours
Full Cure: 7 days
20 KG moisture resistant bags
Store in a cool, dry place
Protect from moisture
Shelf life up to 12 months in unopened original packaging
Avoid contact with skin and eyes
Use gloves and protective equipment during application
Keep out of reach of children
Refer to Safety Data Sheet (SDS) for detailed information
SB Pro C2TE is specifically designed to support the weight and size of large format tiles, ensuring secure and stable installations.
Advanced formulation minimizes tile movement during installation, allowing accurate alignment for walls and vertical surfaces.
Developed for contractors and commercial projects where strong adhesion and long term reliability are essential.
Perfect for contemporary architecture, elevation designs, and premium tile installations requiring precision and durability.
