- info@stonebirdchemicals.com
- 36/A Sundar Small Estate Lahore, Pakistan
- +923379647961
SB Hydra Shield Waterproof Agent is a light duty, liquid applied waterproofing and anti leakage compound developed by StoneBird Chemicals to protect structures from water seepage, dampness, and moisture damage. It forms a strong protective barrier that prevents water penetration on commonly exposed surfaces Designed for both DIY users and professional applicators, SB Hydra Shield Waterproof Agent is easy to apply using a brush, roller, or spray, making it an ideal solution for preventive waterproofing and minor leakage control in residential and light commercial environments.
Forms a protective barrier that helps prevent water penetration and surface leakage.
Smooth liquid consistency allows easy application using brush, roller, or spray.
Works effectively in rain, humidity, and damp environmental conditions.
Perfect for bathrooms, balconies, roofs, and other areas needing preventive waterproofing.
SB Hydra Shield Waterproof Agent is a water based waterproofing compound suitable for areas where light duty protection is required. It performs reliably in humid, rainy, and damp conditions while offering smooth coverage and consistent results throughout the year.
SB Hydra Shield Waterproof Agent is recommended for:
Roofs and terraces
Bathroom walls and floors
Outer surface of water tanks
Basements
Balconies
Other leakage prone surfaces
Suitable wherever light-duty waterproofing is required.
Approx. 100 sq. ft. per kg (single coat)
Coverage may vary depending on surface texture and application technique.
Clean the surface thoroughly by removing dust, oil, loose particles, and moisture
Ensure the surface is clean and dry before application
Apply evenly using a brush, roller, or spray
Allow the first coat to dry for 6–12 hours
Apply additional coats if required for enhanced protection
Mixing:
Ready to use
For primer coat, dilute with clean water up to 1:1 ratio, if required
Touch Dry: 6–12 hours
Drying and curing depend on temperature, humidity, and surface conditions.
Physical State: Liquid
Density: Approx. 1.02 – 1.05 g/cm³
pH Value: Neutral to slightly alkaline (7.5 – 9.0)
Water Resistance: Excellent
Solubility: Water based
Creates an effective water-resistant barrier
Reduces seepage and surface leakage
Performs well in rain and humid conditions
Easy and uniform application
Suitable for year round use
ASTM D4060 – Abrasion Resistance
ASTM D4541 – Adhesion Strength
ASTM D412 – Elastomeric / Tensile Properties
EN 14891 – Liquid Applied Waterproofing Systems
Available in:
1 KG
2 KG
3 KG
5 KG
Store in a cool, dry place
Keep container tightly closed
Protect from direct sunlight
Shelf Life: 12 months in unopened original packaging
Avoid contact with eyes and skin
Wear gloves during application
Do not ingest
Keep out of reach of children
Wash hands after use
SB Hydra Shield Waterproof Agent offers a practical and cost effective waterproofing solution for everyday leakage control. Backed by StoneBird Chemicals’ quality standards, it delivers dependable performance, easy application, and long-lasting protection for light duty waterproofing needs.
