- info@stonebirdchemicals.com
- 36/A Sundar Small Estate Lahore, Pakistan
- +923379647961
StoneBird Tile Bond C2T is a high performance cement based tile adhesive designed for professional tile fixing applications. Engineered to deliver improved adhesion strength, reduced tile slip, and extended open time, C2T ensures reliable installation of ceramic, porcelain, and mosaic tiles on both floors and walls. Suitable for interior and exterior use, it is ideal for residential, commercial, and light industrial projects.
Delivers improved bonding strength to keep tiles firmly fixed on floors and walls for long lasting performance.
Minimizes tile movement during installation, ensuring accurate alignment and a professional finish.
Provides more working time for easy adjustment and smoother installation without rushing.
Suitable for ceramic, porcelain, and mosaic tiles on interior and exterior surfaces.
StoneBird Tile Bond C2T is an improved performance cementitious tile adhesive developed to meet demanding construction requirements. Its advanced formulation provides strong bonding, excellent workability, and consistent results across a wide range of substrates and tile types.
Ceramic tiles
Porcelain tiles
Mosaic tiles
Floors and walls
Residential buildings
Commercial projects
Light industrial applications
Cement screeds
Concrete surfaces
Cement plaster
Brick masonry
Surfaces must be sound, clean, dry, and free from dust, oil, grease, or loose particles.
StoneBird Tile Bond C2T has been tested in accordance with internationally recognized standards:
Compressive Strength:
Meets structural strength requirements for cementitious tile adhesives
(BS 1881 Part-4)
Pull-Off Adhesion Strength:
Achieved improved adhesion consistent with C2T classification
(ASTM D-7234 / EN 12004)
Shear Strength:
Satisfactory resistance under load conditions
(AASHTO T 193)
Appearance: Grey powder
Bulk Density: ~1.4 – 1.6 g/cm³
Mixing Ratio: Approx. 5–6 liters clean water per 25 KG
Pot Life: 3–4 hours
Open Time: ≥ 30 minutes
Adjustability Time: 15–20 minutes
Approximately 4–5 m² per 25 KG bag
(Coverage depends on tile size, substrate condition, and trowel notch size.)
Add Tile Bond C2T powder to clean water and mix until a smooth, lump free paste is achieved.
Allow the mixture to stand for 5 minutes, then remix before use.
Apply adhesive using a suitable notched trowel.
Fix tiles by pressing firmly into the adhesive bed.
Allow adequate curing before grouting.
Initial Set: 24 hours
Grouting Time: After 24 hours
Full Cure: 7 days
25 KG moisture resistant bags
Store in a cool, dry place
Protect from moisture
Shelf life up to 12 months in unopened original packaging
Avoid contact with skin and eyes
Use gloves and protective equipment during application
Keep out of reach of children
Refer to Safety Data Sheet (SDS) for detailed information
StoneBird Tile Bond C2T combines tested performance, professional reliability, and ease of application. Backed by laboratory verification and developed for real site conditions, it delivers consistent results for tile installation projects across Pakistan.
