A high-performance cementitious adhesive engineered for secure, long-lasting tile and stone installations.
SB Grip Bond is a grey cementitious powder formulated using graded minerals, bonding polymers, and performance additives. When mixed with clean water, it forms a smooth, high-adhesion mortar capable of bonding ceramic tiles, mosaics, marble, and natural stone to most construction substrates. It is suitable for residential, commercial, and industrial projects requiring stable bond performance.
| Spec | Value |
|---|---|
| Appearance | Grey Powder |
| Density | ≈1.5 g/cm³ |
| Packaging | 20 KG Bag |
| Mixing Water | 4.5–5.5 L per 20 KG bag |
| Pot Life | 3–4 hours |
| Open Time | 15–20 minutes |
| Adjustability Time | Up to 10 minutes |
| Coverage | 4–5 m² per 20 KG (depends on trowel & tile) |
| Compressive Strength | 1534 psi |
| Shear Strength | 1067 psi |
| Pull-Off Adhesion | 1.12 N/mm² |
Achieves excellent adhesion strength, ensuring tiles remain firm and stable under long-term use.
Creates a uniform mortar without clumping, making application efficient and clean.
Compression and shear strength results verified through certified laboratory testing.
Long pot life (3–4 hours) allows comfortable working time for installers during larger projects.
Perfect for fixing:
Ceramic tiles
Porcelain tiles
Mosaic tiles
Marble & natural stone
Wall & floor surfaces
Indoor and outdoor installations
(Ensure appropriate grout is used for joints after adhesive curing.)
Ensure surfaces are dry, dust-free, and structurally sound.
Remove contaminants such as oil, wax, curing compounds, or loose material.
Lightly moisten highly porous surfaces before applying adhesive avoid pooled water.
Pour 4.5–5.5 L clean water into a mixing bucket.
Gradually add SB Grip Bond while mixing.
Blend using a low-speed mixer until a smooth, lump-free paste is formed.
Allow the mix to rest for 5 minutes, then re-mix briefly.
Apply adhesive using a notched trowel according to tile size.
Spread only enough adhesive that can be tiled within 15–20 minutes.
Press tiles firmly to ensure full contact with the adhesive bed.
Tiles may be adjusted within the first 10 minutes.
Light foot traffic: After 24 hours
Grouting: After 24 hours
Full curing: Within 7 days under standard conditions
Optimal temp: Around 25°C ± 2°C at 50% humidity
Use protective gloves and eyewear during mixing and application.
Avoid inhalation of dust during product handling.
Rinse immediately with water if contact occurs with skin or eyes.
Refer to Safety Data Sheet (SDS) if available.
Keep bags elevated on pallets never place directly on ground.
SB Grip Bond is tested according to:
ASTM D-7234
EN 12004
AASHTO T 193
BS 1881 Part-4
Laboratory testing conducted by Building Standards Laboratory (PEC Consult/1433).
Manufacturing quality system certified under:
ISO 9001:2015
ISO 14001:2015
ISO 45001:2018
Suitable for ceramic, porcelain, mosaic, marble and natural stone installations.
The pot life is approximately 3–4 hours.
Grouting should begin 24 hours after installation.
You can expect 4–5 m² depending on trowel size and substrate.
